How to install home solar energy?

Are you still worrying about how to install a solar system?

The solar system can not only provide stable output power, but also save our expensive electricity bills and solve the trouble of unstable mains power. It has become our best choice. Now let me introduce the method of installing a solar system for you.

1. Connect the solar panel and controller.

First of all, we need to open the solar junction box, connect the positive and negative poles on the solar panel, loosen the screws of the controller, divide the wires into positive and negative poles, connect them from the low end, and then tighten the screws. To ensure that the wiring is normal, there will be a digital display on the controller when there is enough sunlight.

2. Link the solar panel and the controller.

Connect the positive and negative poles of the battery, loosen the screws of the controller, divide the wires into positive and negative poles, connect them from the low end, and then tighten the screws.

3. Connect the battery and inverter.

Turn off the inverter output short switch, connect the positive and negative poles of the battery, according to the instruction manual of the inverter, divide the positive and negative poles into the inverter end, and then connect the AC load, and connect the desk lamp plug to the inverter AC output port, turn on the light power switch, the light will be on.

Precautions for home solar use

Make sure the power is sufficient, and check whether the installation position of the lamp can be exposed to sunlight. Lamps cannot be fully charged on cloudy and rainy days, and need to be charged on sunny days. It must be kept away from other light sources, etc.